PV surge protection V20, 1,000 V DC - Blitztek

PV surge protection V20, 1,000 V DC

Product description
BT-94 608
V20 surge arrester, type 2, for photovoltaic systems

• Complete unit, consisting of plug-in varistor arrester with cut-off unit

• Error-resistant Y circuit to VDE 0100-712 (EN 50539-12)

• Surge protection equipotential bonding to VDE 0100-443 (IEC 60364-4-44)

• V20-C 3-PH-1000 tested to EN 50539-11 (VDE / KEMA)

• Arresting capacity to 40 kA (8/20) per pole

• Low DC protection level: < 4.0 kV and Voc max = 1,000 V DC

• With visual status display for use in distributor housings

Application: PV systems with or without separate lightning protection system
5-year warranty Communautés Européennes, EC declaration of conformity according to EC directives Protection device to DIN EN 61643-11 or IEC 61643-11 Transition from LPZ 1 to LPZ 2 Installation electrotechnical expertise CO₂ footprint (PCF) Packaging without plastic

Categories: ,

Description

Technical data

Blow-out no
CO2 Footprint (GWP) Cradle-to-Gate 0,9504 kg CO2e / 1 Piece
Conductor cross-section, rigid (single-wire/multiwire), max. 35 mm²
Conductor cross-section, rigid (single-wire/multiwire), min. 2,5 mm²
DC network form yes
Dimension 1000V DC
Installation type DIN rail 35 mm
Lightning protection zone LPZ 1→2
Max. mains-side overcurrent protection 125
Maximum back-up fuse 125 A
Maximum continuous voltage DC 1000 V
Maximum discharge current (8/20 μs) 40 kA
Network form Other
Nominal discharge current (8/20 µs) 20 kA
Operating temperature, max. 80 °C
Operating temperature, min. -40 °C
Permitted temperature range, max. 80 °C
Permitted temperature range, min. -40 °C
Pole version 3
Protection rating IP20
Remote signalling no
Response time <25 ns
Signalling on device Visual
SPD to EN 61643-11 Type 2
SPD to IEC 61643-1 Class II
Test class, type 2 yes
Version for 3-pole for PV systems

Related products